Electric pipe threader (1/2"-3/4"; 1"-2") 220V/1500W (P50C)

HYDRAFORE P50C

Electric pipe threading machine (1/2"-3/4"; 1"-2")

Working range:
½” – 2” steel heating and galvanized pipes

Motor power:
1500 W / 220 V

Speeds:
38 rpm

Speeds:
1 speed

Operation:
On and off via push button, on the side of the machine

Built-in functions:

• Roller pipe cutter up to 2”
• Pipe deburrer
• Built-in oiling through the thread cutting head
• Built-in oil pan and oil pump

Area of application

The P50C 2” threading machine is an ideal choice for threading galvanized and carbon steel pipes, especially for jobs where a large quantity of large diameter threads needs to be made.

Typical areas of application:

• Installation of main water lines
• Fire water main lines
• Installation of sprinkler systems

Use and operation

The P50C threading machine is suitable for threading all standard inch-sized pipes from ½” up to 2” diameter.
The built-in oil pump directly oils the threading dies, ensuring a long lifespan for the dies and accurate, clean threads.

Work is significantly facilitated by the large, built-in roller pipe cutter, as well as the pipe deburring unit, which allow for complete pipe preparation on a single machine.

The machine is started and stopped using push buttons located on the side of the machine.

Thread cutting heads and dies

The machine has one automatic thread cutting head, which comes with two sets of dies:

• ½” – ¾”
• 1” – 2”

The automatic thread cutting head automatically disengages when the set thread length is reached, thereby increasing accuracy and work safety.

Safety information

• Before operating the machine, always check for the correct amount of threading oil or emulsion.
  Operation of the machine without a minimum of 1.5 liters of oil is prohibited.
• When working on longer pipes, the use of a pipe stand is mandatory.
  The height of the rolling pipe support on the pipe stand must be adjusted to the center height of the threading machine's spindle.
  In case of improper support, the pipe cannot be securely fixed, which can lead to damage to the threading head or the dies.

*2-year EZ-Tools warranty on all our products under the HYDRAFORE brand name!