Gear spray, black 400ml (WÜRTH 08931055)

*The image is illustrative and does not reflect the product's dimensions!

You can find the exact dimensions in the table below.

WÜRTH 08931055

Gear spray 400ml

• Black, shear-resistant, and high-pressure resistant special lubricant
  
• Resistant to high pressure
• Reliable protection against wear even under high-pressure loads
  
• Excellent sound insulation and vibration dampening
  
• Shear-resistant
• Excellent lubricating properties, including for fast-rotating lubrication points
• Contains solid lubricant
• Good emergency lubrication capability (the solid lubricant prevents extreme wear in the critical phase of lubricant film detachment).
• Contains corrosion inhibitors
• Penetrates moisture and protects against corrosion
• O-ring compatible
• Resistant to water spray and saltwater, as well as weak acids and alkalis
• Silicone, resin, acid, and bitumen-free

Note:
Before use, contaminated lubrication points must be thoroughly cleaned and degreased with 1A cleaner, part number: 0890 106 500.

The instructions for use are recommendations based on our tests and experience; always perform a test before each application. Given the wide range of applications and the various storage and processing conditions, we do not assume any responsibility for any consequences arising from individual use. If our free customer service provides technical information or acts as an advisory service, the customer service does not assume any responsibility, unless the information or advice provided is part of our contractually agreed services or the advisor acted intentionally. We guarantee the consistent quality of our products. We reserve the right to implement technical changes and improvements.

Area of application
Black, shear-resistant, and high-pressure resistant special lubricant. Excellent for fast-rotating lubrication points.

Instructions
Clean and degrease the surface. Shake the can thoroughly before use. Spray the lubrication point evenly from a distance of approx. 20 cm. For operating gears, always direct the spray nozzle continuously to one point. After use, turn the can 180° and spray for approx. 5 seconds. Before use, contaminated lubrication points must be thoroughly cleaned and degreased with 1A cleaner, part number: 0890106500.