Assembly Paste Spray, 300ml (WÜRTH 0893850)
| Technical Parameters: | |
| Manufacturer's part number: | 0893850 |
| Volume: | 300 ml |
| Chemical base: | Calcium complex grease |
| Odor/fragrance: | Characteristic |
| Color: | Black |
| Weight: | 0.3 kg |
| Shipping size: | 25x10x10 cm |
*The image is illustrative and does not reflect the actual dimensions of the product! For precise dimensions, please refer to the table below.
WÜRTH 0893850
Assembly paste spray, 300ml
High-performance assembly paste spray for running-in lubrication
Protects against wear and ensures forced lubrication
The solid lubricant film reduces friction, prevents seizing and scoring.
High resistance
-
Resistant to water, salt water, diluted acids and alkaline solutions
The 60% dry matter content resists gasoline, diesel, etc.
Heat and pressure resistant
- Temperature resistance between -35 °C and +150 °C; tolerates higher temperatures for short periods with reduced air supply
- Pressure resistant up to the yield point of all known metals
The instructions for use are recommendations based on our conducted tests and our experience; please perform your own tests before each application. Due to the wide range of applications and varying storage and processing conditions, we do not assume any responsibility for the consequences of any individual use. If our free customer service provides technical information or acts as an advisory service, no liability will be assumed by the customer service, except where the information or advice given falls within the scope of our contractually specified services, or the advisor acted deliberately. We guarantee the consistent quality of our products. We reserve the right to make technical changes and improvements.
Can be used as lubricant for running-in new machinery, guide rails, threaded spindles, splined shafts, heavily loaded gears, worm drives and manual transmissions, as well as chemical equipment, plain bearings exposed to high heat and surface loads, all types of pressing tools, for pressing and pulling rolling bearings, washers, wheels, flanges and pins; for fittings (gate valves, valves, taps). For deep drawing, thread cutting, drilling and sawing. For cutting, punching and bending tools.
Shake the product before use. Spray onto the surface to be treated and wait for the solvent to evaporate.
Shipping information
Returns & Warranty
Return Policy
